Rear Panel Trim

Trim

Rear Panel Trim





1 - Rear panel trim

• Removing

- Remove luggage compartment floor mat => [ Luggage Compartment Liner ]. Luggage Compartment Liner

- Remove lower rear shelf trim => [ Lower Rear Shelf Trim ]. Lower Rear Shelf Trim

- Pry out upper part - 3 - of spreader clips - 2 - (Qty. 7) using a flat-head screwdriver.

- Remove spreader clips - 2 - (Qty. 7).

- Pull rear panel trim - 1 - out from under ski bag frame - 4 -.

- Remove rear panel trim.

• Installing

Installation is reverse of removal. Observe the following when doing so:

• Replace damaged spreader clips - 2 - and upper parts - 3 -.

• To begin the installation, clip in rear panel trim under the ski bag frame. If necessary, use trim removal wedge (3409).

• Make sure there are no creases on the rear panel trim.

2 - Spreader clips (Qty. 7)

• Replace if damaged

3 - Upper part (Qty. 7)

• For spreader clip - 2 -

• Replace if damaged

4 - Ski bag