Timing Chain Covers Assembly Overview

Timing Chain Covers Assembly Overview





1 Bolt

• Replace the M6 bolt

• Tightening specification and sequence => [ Set lower timing chain cover in place,
guiding cover at an angle from below onto cylinder block sealing surface and
cylinder head. ] Lower Timing Chain Cover

2 Crankshaft Shaft Seal, Transmission Side

• Replacing, refer to => [ Crankshaft Seal, Transmission Side ] Service and Repair.

3 Alignment Bushing

• 2 pieces

4 Left Cylinder Head Gasket

5 9 Nm

• Always follow the specified tightening sequence: for left, refer to => [ Position left timing chain cover and tighten bolts in sequence. ] Left and Right Timing Chain Covers; for right, refer to => [ Position right timing chain cover and tighten screws in sequence. ] Left and Right Timing Chain Covers

6 Left Timing Chain Cover

• Removing and installing, refer to => [ Left and Right Timing Chain Covers ] Left and Right Timing Chain Covers

7 O-ring

• Replace

8 Left Coolant Intermediate Pipe

• Drive out with suitable drift

9 O-ring

• Replace

10 9 Nm

• Note tightening sequence => [ Position right timing chain cover and tighten screws in sequence. ] Left and Right Timing Chain Covers

11 Right Timing Chain Cover

• Removing and installing, refer to => [ Left and Right Timing Chain Covers ] Left and Right Timing Chain Covers

12 O-ring

• Replace

13 Right Coolant Intermediate Pipe

• Drive out with suitable drift

14 O-ring

• Replace

15 Right Cylinder Head Gasket

16 Alignment Bushing

• 2 pieces

17 Lower Timing Chain Cover

• Removing and installing, refer to => [ Lower Timing Chain Cover ] Lower Timing Chain Cover