Antenna Amplifier 2

Antenna Amplifier 2

The antenna amplifier 2 is located on the bottom right of the rear lid.

- Switch off all electrical consumers.

- Remove the key.

Removing

- Remove lower rear lid trim.

- Disconnect electrical connectors - 2 -, - 4 - and - 5 - on antenna amplifier 2 - 1 -.





- Remove nuts - 3 -.

- Remove antenna amplifier 2 - 1 - from rear lid.

Installing

- Install in reverse order.

Tightening specifications. Refer to => [ Antenna system Assembly Overview ] Antenna System Assembly Overview.