Luggage Compartment Side Trim

Luggage Compartment Side Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing

- Fold luggage compartment floor mat forward.

- Remove the rear cross panel trim. Refer to => [ Rear Cross Panel Trim ] Rear Cross Panel Trim.

Right Luggage Compartment Side Trim Panel Only

- Using a screwdriver, pry out light - 1 - on side - 3 -.






The - arrow - points to the direction of travel.

- Disconnect the connector - 2 -.

Procedure for Both Sides

- Fold bracket - 4 - down.






- Remove the bolts - arrows - and then remove the tie down - 3 -.

- Unclip the luggage compartment side trim panel - 1 - using the trim removal wedge (3409).

Installation

Install in reverse order of removal. Note the following:

- Stretch the rear lid seal - 2 - over the luggage compartment side trim panel - 1 -.

For the correct tightening specifications; refer to => [ Luggage Compartment Side Trim Assembly Overview ] Luggage Compartment Side Trim Assembly Overview.