Luggage Compartment Side Trim

Luggage Compartment Side Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing

- Fold luggage compartment floor mat completely forward.

- Remove the luggage compartment floor covering.

- Remove the rear cross panel trim. Refer to => [ Rear Cross Panel Trim ] Rear Cross Panel Trim.

Right Luggage Compartment Side Trim Panel Only

- Using a screwdriver, pry out light - 1 - on side - 3 -.






The - arrow - points to the direction of travel.

- Disconnect the connector - 2 -.

Procedure for Both Sides

- Unclip the luggage compartment side trim panel using the trim removal wedge (3409).

Installation

Install in reverse order of removal. Note the following:

• If trim clamps remain in body mounting points, remove these and insert them in trim.

• Check clamps for damage or deformation, replace if necessary.

- Stretch the rear lid seal over the luggage compartment side trim panel.