Rear Lid Trim

Rear Lid Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing

- Remove rear lid lock trim - 1 -. Refer to => [ Rear Lid Lock Trim ] Rear Lid Lock Trim.

- If present, unclip SDARS antenna trim from rear lid.

- Remove bolts - 2 -.






- Unclip rear lid trim - 3 - with Trim Removal Wedge (3409).

Installation

Install in reverse order of removal. Note the following:

• If trim clamps remain in body mounting points, remove these and insert them in trim.

• Check clamps for damage or deformation, replace if necessary.

For the correct tightening specifications; refer to => [ Rear Lid Trim Assembly Overview ] Rear Lid Trim Assembly Overview.