Windshield Frame Trim

Windshield Frame Trim

Removing

- Remove Front Interior Light (W1).

- Remove sun visors. Refer to => [ Sun Visor Assembly Overview ] Sun Visor Assembly Overview.

- Remove the bolts - A - and - B - (located in the opening for the front interior lamp (W1) ). Remove buffer - C -.






- Unclip the windshield frame trim from the upper A-pillar trim - D - in direction of - arrow - starting from the rear.

Installation

Install in reverse order of removal. Note the following:

- Insert the windshield frame trim - 1 - - arrow A - into the upper A-pillar trim - 2 - from the front and then swivel it upward.






While doing this, the windshield frame trim must engage with the A-pillar trim - arrow B -.

For the correct tightening specifications, refer to => [ Windshield Frame Trim Assembly Overview ] Windshield Frame Trim Assembly Overview.