Exhaust System: Service and Repair

Exhaust System, Aligning

• Align exhaust system when cold.

• For the correct tightening specifications, refer to => [ Muffler Overview ] Muffler Overview.

- Loosen front double clamp bolts => [ (Item 3) Clamping Sleeve ] Muffler Overview.






- Press rear muffler forward - arrow - until pretension at left retaining loop - a - = 11 to 13 mm.

- Install clamping sleeve in angled position shown.






• Threaded connections point toward the right.

• Nuts face up.

• alpha = approximately 20°

- Tighten clamping sleeve threaded connections evenly.

Align the Tail Pipes:






- Align the tail pipes so the distance - a - is the same on the left and right.

- At the same time, the clearance - b - from the bumper cut-out to the tail pipes must be achieved.

• Dimension b = minimum 21 mm

- If necessary, loosen the suspended mountings of the rear muffler to align the tail pipes.