Lumbar Support Adjustment Switches E176 and E177 Assembly Overview

Lumbar Support Adjustment Switches E176 and E177 Assembly Overview






1 Sill-side trim

2 Bolt

• 0.5 Nm

• Quantity: 2

3 Lumbar support adjustment switch

• Driver side (E176)

• Passenger side (E177)

• Removing and Installing, refer to => [ Lumbar Support Adjustment Switches E176 and E177 ] Lumbar Support Adjustment Switches E176 and E177

• Switch and actuator cannot be disconnected and replaced separately

• Connector connecting direction from below

• On power front seats with passenger occupant detection system (country-specific), the driver seal lumbar support adjustment switch (E176) or (E177) is rotated 180° when installed

• Connector connecting direction from above