Bench Seat Cover, Separating From Upholstery

Bench Seat Cover, Separating from Upholstery

Removing

- Remove cover with upholstery. Refer to => [ Bench Seat Cover and Upholstery ] Bench Seat Cover and Upholstery.

- Remove the cover - 1 - from the upholstery - 2 - as far as possible.






3 retaining wire slid into cover
5 wire in foam in upholstery

- Cut through clips - 4 - with pliers.

- Remove the cover - 1 - from cushion - 2 -.

Installation

Install in reverse order of removal. Note the following:

- Use new upholstery clips.

- Close wire clips with upholstery clip pliers (V.A.G 1634).

- Place the upholstery clips in their original locations.