Diagram 17/2 (Tracks 1-14)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Lumbar Support Adjustment Switch, Lumbar Support Adjustment Motors, Fuses





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

E176 - Driver's Seat Lumbar Support Adjustment Switch Locations

E177 - Front Passenger's Seat Lumbar Support Adjustment Switch Locations

SA4 - Fuse 4 (on fuse panel A) Locations

SB8 - Fuse 8 (on fuse panel B) Locations

SB10 - Fuse 10 (on fuse panel B) Locations

T6aa - 6-Pin Connector, in driver seat

T6ab - 6-Pin Connector, in front passenger's seat

T10f - 10-Pin Connector, red, below driver's seat Overview of connector stations and pin connectors

T10g - 10-Pin Connector, red, below front passenger's seat Overview of connector stations and pin connectors

V125 - Driver's Seat Lumbar Support Curvature Adjustment Motor Locations

V126 - Front Passenger's Seat Lumbar Support Curvature Adjustment Motor Locations

V129 - Driver's Seat Lumbar Support Height Adjustment Motor Locations

V130 - Front Passenger Seat Lumbar Support Height Adjustment Motor Locations

(43) - Ground Connection (on right lower A-pillar) Locations

(44) - Ground Connection (on left lower A-pillar) Locations

(374) - Ground Connection 9 (in main wiring harness)

(389) - Ground Connection 24 (in main wiring harness)

(390) - Ground Connection 25 (in main wiring harness)

(B272) - Plus Connection (30) (in main wiring harness)

* - Main fuse panel electronics box, in front left engine compartment