Diagram 47/30 (Tracks 393-406)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Diagnostic Connector, Radio Frequency Controlled Clock Receiver, Radio Frequency Controlled Clock





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Component Locations

J489 - Radio Frequency Controlled Clock Receiver

J623 - Engine Control Module (ECM) Component Locations

T16 - 16-Pin Connector, Diagnostic Connector

T32 - 32-Pin Connector, blue, on instrument cluster control module

Y8 - Radio Frequency Controlled Clock

Y24 - Display Unit in Instrument Cluster

(393) - Ground Connection 28 (in main wiring harness)

(662) - Ground Connection (on left rear side panel) Locations

(B444) - OBD Connection 1 (in main wiring harness)

^ - CAN-Bus (data wire)

* - => Wiring Diagram Engine

Previous Diagram 47/29 (Tracks 379-392)

Next Diagram 47/31 (Tracks 407-420)