Diagram 3/16 (Tracks 197-210)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Engine Control Module (ECM), Secondary Air Injection (AIR) Pump Relay, Secondary Air Injection (AIR) Pump Motor, Leak Detection Pump (LDP), Secondary Air Injection (AIR) Solenoid Valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J299 - Secondary Air Injection (AIR) Pump Relay Relay carrier in electronics box engine compartment

J623 - Engine Control Module (ECM) Component Locations

N112 - Secondary Air Injection (AIR) Solenoid Valve 3.2L Gasoline BUB, CBRA Overviews

N320 - Secondary Air Injection (AIR) Solenoid Valve 2 3.2L Gasoline BUB, CBRA Overviews

T81 - 81-Pin Connector, black, on engine control module (ECM)

V101 - Secondary Air Injection (AIR) Pump Motor Engine Management System

V144 - Leak Detection Pump (LDP) Locations

(367) - Ground Connection 2 (in main wiring harness)

(672) - Ground Connection 2 (on left front long member) Locations

(B350) - Plus Connection 1 (87a) (in main wiring harness)

* - Models with leak detection pump (LDP)

** - Relay and fuse carrier in electronics box engine compartment

# - Only USA

Previous Diagram 3/15 (Tracks 183-196)

Next Diagram 3/17 (Tracks 211-224)