Diagram 3/20 (Tracks 253-266)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Oil Pressure Switch, Engine Coolant Level (ECL) Warning Switch, Fuel Level Sensor, Fuel Gauge, Transfer Fuel Pump (FP), Fuel Level Sensor 2





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F1 - Oil Pressure Switch Engine Management System

F66 - Engine Coolant Level (ECL) Warning Switch Locations

G - Fuel Level Sensor Locations

G1 - Fuel Gauge

G6 - Transfer Fuel Pump (FP) Locations

G169 - Fuel Level Sensor 2 Locations

J285 - Instrument Cluster Control Module Component Locations

K3 - Oil Pressure Warning Lamp

K28 - Engine Coolant Level/Temperature (ECL/ECT) Warning Lamp

T5a - 5-Pin Connector, black, on fuel level sensor

T14 - 14-Pin Connector, black, in left front engine compartment

T32 - 32-Pin Connector, blue, on instrument cluster control module

Y24 - Display Unit in Instrument Cluster

(43) - Ground Connection (on right lower A-pillar) Locations

(390) - Ground Connection 25 (in main wiring harness)

(410) - Sensor Ground Connection 1 (in main wiring harness)

* - Output Sensor

** - Models with all-wheel drive

Previous Diagram 3/19 (Tracks 239-252)

Next Diagram 3/21 (Tracks 267-280)