Shift Forks Assembly Overview

Shift Forks Assembly Overview






1 Rubber Damper

• Can be pulled out of selector rod and inserted by hand

2 Selector Rod with Shift Fork for 1st and 2nd Gear

3 Selector Rod with Shift Fork for 3rd and 4th Gear

4 Selector Rod with Shift Fork for 5th and 6th Gear

• Also serves as the bearing for the reverse gear shift fork as of transmission build date 5/25/09

5 Reverse Gear Shift Fork

• from transmission manufacture date 06 03 6, ball sleeve - 6 - has been omitted

• Sliding omission

• Reverse gear shift fork is adapted

• From transmission build date 5/25/09, bearing on the selector rod for the shift fork for 5th and 6th gear

• Reverse gear shift fork differentiation

• Allocation, refer to the electronic parts catalog ETKA

6 Ball sleeve

• No longer used as of transmission build date 3/06/06

• Sliding omission

• Allocation, refer to the electronic parts catalog ETKA

• Pulling out => [ Pulling Off Ball Sleeve for
Reverse Gear Shift Fork ] Shift Forks

• Installing => [ Pressing In Ball Sleeve for
Reverse Gear Shift Fork ] Shift Forks

Reverse Gear Shift Fork Differentiation