Tire Pressure Monitoring Control Module (J502)

Tire Pressure Monitoring Control Module (J502)

Removing

The tire pressure monitoring control module is located under the instrument cluster.

Before removing control module, read out code using Guided Fault Finding in "Replace control module" function.

- Remove instrument cluster.

- Remove bolts - arrows -






- Remove the tire pressure monitoring control module - 2 - and disconnect the connector - 1 -.

Installing

Install in reverse order of removal.

- If Tire Pressure Monitoring Control Module is replaced, system must be coded => [ Tire Pressure Monitoring System Usage, Direct System ] Tire Pressure Monitoring System Usage, Direct System.