Controls, Housing

Special Tools

Special tools, testers and auxiliary items required

• Guide Pin (VW 436 A)

• Guide Pin (VW 439)

• Slide Hammer-Complete Set (VW 771)

• Holding Fixture (VW 801)

• Guide Pin (10 - 15)

• Thrust Pad (3124)

Special tools, testers and auxiliary items required

• Punch (VW 407)

• Sleeve (30 - 21)

• Drift (T10168)

• Thrust Piece (T40008)

• - 1 - Kukko 21/2 Internal puller and Kukko 21/4

• - 4 - Kukko support 22/1 and 22/2

Special tools, testers and auxiliary items required

• Bracket (30 - 211 A)

• Thrust Piece (T10042)

• Drift (T10169)

• Thrust Piece (T40008)

• Torque Wrench (V.A.G 1331)

• Heat Gun (V.A.G 1416)

Special tools, testers and auxiliary items required

• Engine Support Bridge (10 - 222 A)

• Hook (10 - 222 A /10)

• Hose Clamps Up to 25 mm Diameter. (3094)

• Transmission Support (3282)

• Pin (3282/29)

• Adjustment Plate (3282/33)

Special tools, testers and auxiliary items required

• Engine/Transmission Jack (V.A.G 1383 A)

• Engine Support Basic Set (T40091)

• Engine Support Supplement Set (T40093)

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

Special tools, testers and auxiliary items required

• Driving Sleeve (VW 244 B)

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Sleeve (VW 416 B)

• Driver (3264)

Special tools, testers and auxiliary items required

• Subframe Support Assm. Device (3290)

• Drift (T10168)

• Drift (T10169)

• Thrust piece (T10203)

• - 1 - Kukko 21/2 Internal puller and Kukko 21/4

• - 4 - Kukko 22/2 counter-support

Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

• Thrust Tube (VW 455)

• Slide Hammer-Complete Set (VW 771)

• - 1 - Kukko 21/1 internal puller

• - 3 - Kukko 17/0 separating tool

• - 4 - Kukko 22/1 counter-support

Special tools, testers and auxiliary items required

• Thrust Plate (VW 402)

• Punch (VW 411)

• Sleeve (VW 423)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• - 1 - Kukko 21/3 internal puller

• - 4 - Kukko 22/1 counter-support

Special tools, testers and auxiliary items required

• Bracket (30-211A)

• Thrust piece (T10042)

• Thrust piece (T10143)

• Thrust piece (T40008)

• Torque Wrench (V.A.G 1331)

• Heat gun (V.A.G 1416)

• Drift (T10169)

• or Drift (T10362) => [ Lock Sleeve Differentiation ] Transmission Housing

Special tools, testers and auxiliary items required

• Triple Square Socket Driver (3357)