Gears, Shafts

Special Tools






Special tools, testers and auxiliary items required

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Thrust Disc (VW 412)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Arbor 50 mm Dia. (VW 432)






Special tools, testers and auxiliary items required

• Thrust Tube (VW 454)

• Locking Pin (30 - 505)

• Thrust piece (40 - 105)

• Press Tube (2040)

• - 1 - Kukko 21/5 internal puller

• - 2 - Puller 18/1

• - 3 - Separating tool 17/1 and 17/2

• - 4 - Kukko 22/2 counter-support






Special tools, testers and auxiliary items required

• Dial Gauge Holder (VW 387)

• Punch (VW 407)

• Thrust Pad Con. 8/65 (VW 433)

• Installation Arbor (VW 792)

• Holding Fixture (VW 801)

• Thrust Plate (2050)






Special tools, testers and auxiliary items required

• Grip (V.A.G 1582/7)

• Thrust Pad Con. 8/65 (VW 433)

• Thrust Tube (VW 454)

• Support Channels (VW 457)

• Holding Fixture (VW 801)

• - 1 - Kukko 21/7 internal puller

• - 3 - Separating tool 17/2

• - 4 - Kukko 22/2 counter-support






Special tools, testers and auxiliary items required

• Spacers (VW 540/1 B)

• Sleeve (40 - 20)

• Sleeve (40 - 21)

• Thrust Plate (2050)

• Tapered Roller Bearing Puller (V.A.G 1582)

• Grip (V.A.G 1582/7)






Special tools, testers and auxiliary items required

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Punch (VW 407)

• Punch (VW 408 A)

• Thrust Disc (VW 412)

• Tube 60 mm Dia. (VW 415 A)






Special tools, testers and auxiliary items required

• Holding Plate (VW 309)

• Holding Fixture (VW 313)

• Transmission Support (VW 353)

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Thrust Pad Con. 8/65 (VW 433)

• Thrust Tube (VW 454)






Special tools, testers and auxiliary items required

• Thrust Pad (VW 512)

• Tube 42 mm Dia. (VW 516)

• Sleeve (VW 519)

• Slide Hammer-Complete Set (VW 771)

• Holding Fixture (VW 801)

• Thrust Piece (40 - 105)






Special tools, testers and auxiliary items required

• Thrust Pad 16.5/28 mm Dia. (VW 431)

• Thrust Tube (VW 455)

• Thrust Pad (VW 510)

• Tube 42 mm Dia. (VW 516)

• Sleeve (VW 519)

• Thrust Pad (30 - 11)






Special tools, testers and auxiliary items required

• Thrust Piece (40 - 105)

• Sleeve (40 - 20)

• Thrust Plate (2050)

• Tube (3296)

• Tapered Roller Bearing Puller (V.A.G 1582)

• Attachment (V.A.G 1582/4)

Special tools, testers and auxiliary items required

• Dial gauge (VAS 6080)





• - 1 - Kukko 21/7 internal puller





• - 4 - Kukko 22/2 counter-support

• - 1 - Kukko extractor 21/7 and 21/8





• - 2 - Puller 18/2

• - 3 - Separating tool 17/2

• - 4 - Kukko 22/2 counter-support