Guide Piece

Guide Piece

Removing






- Remove bumper. Refer to => [ Rear Bumper ] Rear Bumper.

- Remove the screws - arrows - and nuts - 2 -.

- Remove guide piece - 1 -.

Installation






• For the correct tightening specifications, refer to => [ Tightening Torque and Sequence for Guide Piece ] Impact Member, Shock Absorber and Guide Piece Assembly Overview.

Install in reverse order of removal. Note the following:

- Tighten the screws and nuts in the following sequence: - 1 through 4 -.

- Install the bumper. Refer to => [ Rear Bumper ] Rear Bumper.