Sill Panel Trim

Sill Panel Trim

Special tools, testers and auxiliary items required

• Trim removal wedge (3409)






Removing

- Remove side trim - 1 -. Refer to => [ Rear Side Trim ] Rear Side Trim.

- Unclip sill panel strip - 3 - with Trim Removal Wedge (3409).






Installation

Install in reverse order of removal. Note the following:

• If trim clamps remain in body mounting points, remove these and insert them in trim.

• Check clamps for damage or deformation, replace if necessary.

- Stretch door seal lip - 2 - over sill panel strip - 3 -.