Crankshaft, Cylinder Block - Fastener Tightening Specifications

Fastener Tightening Specifications






Accessory Assembly Bracket Tightening Sequence






- Install bolts - 1 through 6 - and tighten by hand.

- Tighten bolts - 1 through 6 - to 40 Nm.

Tightening Sequence of Front Sealing Flange






1. Install bolts - 1 through 10 - and tighten by hand.

2. Tighten the bolts - 1 through 6 - in a diagonal sequence in stages to 15 Nm.

3. Tighten bolts - 7 through 10 - to 15 Nm.

Rear Tightening Sequence






1. Install bolts - 1 through 8 - and tighten by hand.

2. Tighten the bolts - 1 through 6 - in a diagonal sequence in stages to 15 Nm.

3. Tighten bolts - 7 through 8 - to 15 Nm