Front Bucket Seat

Connectors, Disconnecting


• Follow the safety precautions for pyrotechnic components.

• Before handling pyrotechnical components (for example, connecting electrical connector), the person handling them must "discharge static electricity". For example, by briefly touching the door striker pin.

- Loosen seat mounting bolts. Refer to => [ Seat ] Seat.

- Tip front seat back.

- Release cover cap - 1 - in - direction of arrow -.





- Remove wiring bracket - 3 -.





- Release clip in - direction of arrow - with a small screwdriver and disconnect electrical connector - 1 - with side airbag terminal resistance.

• The terminal resistance for the side airbag is a component of the wiring harness.

- Press in tab on connector for heated seat - 2 - on tunnel side and disconnect connector for heated seat.

- Country versions of seat belt fasten sensor: Press the tab on the seat belt fasten sensor connector on the tunnel side and disconnect the seat belt fasten sensor connector.