Glove Compartment Lamp

Glove Compartment Lamp

Removing






- Press in catch - 1 - using a flat screwdriver and pry out glove compartment lamp - 2 -.

- Disconnect electrical connector - 3 -.

- To replace bulb, release retaining clips - arrows - and remove cover - 1 - over bulb.






- Remove bulb - 1 - (12V, 5 W) on back side of glove compartment lamp from socket - 2 -.






Installing

Install in reverse order of removal, noting the following:

- Connect electrical connector.

- Insert glove compartment lamp into opening and engage on opposite side.