Diagram 133/11 (Tracks 127-140)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Map controlled engine cooling thermostat, Engine control module, Wastegate bypass regulator valve, EVAP canister purge regulator valve 1, Secondary air injection solenoid valve, Camshaft adjustment valve 1, Turbocharger recirculation valve, Intake manifold runner control valve





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F265 - Map controlled engine cooling thermostat

J623 - Engine control module Control Modules in Front Part Of Vehicle

N75 - Wastegate bypass regulator valve Locations [1][2]Diagrams

N80 - EVAP canister purge regulator valve 1 Locations [1][2]Canister Purge Control Valve

N112 - Secondary air injection solenoid valve Locations Secondary Air Injection Solenoid Valve -N112-

N205 - Camshaft adjustment valve 1 Locations Camshaft Adjustment Valve 1 -N205-

N249 - Turbocharger recirculation valve Locations [1][2]Diagrams

N316 - Intake manifold runner control valve 2.0L CCTA and CBFA Intake Manifold Runner Control Valve -N316-

SB24 - Fuse 24 (on fuse panel B) Overview Of Fuses

T4d - 4-pin connector, near the coolant fan

T14 - 14-pin connector, near the left front longitudinal member

T40 - 40-pin connector

T60 - 60-pin connector

T94 - 94-pin connector

(B321) - Positive connection 7 (30a) (in main wiring harness)

(D116) - Connection (14) (in engine compartment wiring harness)

* - From May 2010

*2 - Refer to applicable coolant fan wiring diagram

Previous Diagram 133/10 (Tracks 113-126)

Next Diagram 133/12 (Tracks 141-154)