Gears, Shafts

Fastener Tightening Specifications






Oil Pan - Tightening Specification and Sequence

- Tighten the bolts - arrows - diagonally in steps to 16 Nm.





Direct Shift Gearbox (DSG) Mechatronic (J743) - Tightening Specification and Sequence

• Replace bolts that are tightened to specification.

- Tighten the bolts in four steps in the sequence shown:










Transmission Oil Pump - Tightening Specification and Sequence

• Replace bolts that are tightened to specification.

- Tighten bolts - arrows - (different bolts depending on version):





Countersunk bolts - A -:

- Tighten countersunk bolts to 8 Nm diagonally.

Flat head bolts - B -:

- Tighten flat head bolts in 2 stages as follows:






Transmission Oil Pump Cover - A - - Tightening Specification and Sequence

• Replace the cover bolts for transmission fluid pump.

- Tighten the bolts - arrows - diagonally in steps to 8 Nm.





Transmission Input Speed Sensor (G182)/Clutch Oil Temperature Sensor (G509)





A Transmission Input Speed Sensor (G182)/Clutch Oil Temperature Sensor (G509)
B Bolt - 10 Nm
C Electrical connection