Driver Side Storage Compartment

Driver Side Storage Compartment






1 Driver Side Storage Compartment

Removing

• Identify connectors before disconnecting to prevent confusion or for better allocation.

- Switch off all electrical components.

- Remove ignition key.

- Remove left instrument panel cover - 6 -. Refer to => [ Left and Right Instrument Panel Cover ] Left and Right Instrument Panel Cover.

- Remove screws - 2 - (quantity: 3).

- Remove driver side compartment - 1 - from spring clip - 4 -.

- Unclip diagnostic connector from driver side compartment.

- Disconnect electrical connectors on light switch - 3 -.

- Remove driver side storage compartment - 1 -.

Installing

Installation is reverse of removal, but note the following:

- Make sure the connectors engage completely (audibly).

- Slide driver side compartment correctly into spring clip.

2 Bolts

3.5 Nm

• Quantity: 3

3 Light Switch

4 Spring Clamp

5 Base Support Cover

6 Left Instrument Panel Cover

• Removing and Installing, refer to => [ Left and Right Instrument Panel Cover ] Left and Right Instrument Panel Cover

7 Instrument Panel

8 Mounting Bracket

9 Emergency Speaker Securing Bracket