Diagram 126/3 (Tracks 15-28)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Brake fluid level warning switch, Engine coolant level warning switch, Instrument cluster control module





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F34 - Brake fluid level warning switch Locations

F66 - Engine coolant level warning switch

J162 - Heater control module Control Modules in Interior Of Vehicle

J285 - Instrument cluster control module Control Modules in Interior Of Vehicle

J587 - Selector lever sensor system control module Direct Shift Gearbox 02E (DSG)

K14 - Hand brake indicator lamp

K28 - Engine coolant level/temperature indicator lamp

K65 - Indicator lamp for left turn signal

K94 - Right turn signal indicator lamp

K118 - Brake system indicator lamp

T32 - 32-pin connector

(393) - Ground connection 28 (in main wiring harness)

(401) - Sensor ground connection (in interior wiring harness)

(B340) - Connection 1 (58d) (in main wiring harness)

(B482) - Connection 18 (in main wiring harness)

(B708) - Instrument cluster CAN bus high connection 1 (in main wiring harness)

(B709) - Instrument cluster CAN bus low connection 1 (in main wiring harness)

* - Refer to applicable wiring diagram for automatic transmission

*2 - Refer to the applicable wiring diagram for heating with manual control

*3 - Omitted as a running change

Previous Diagram 126/2 (Tracks 1-14)

Next Diagram 126/4 (Tracks 29-42)