Inner Tail Lamps

Inner Tail Lamps

Removing






- Switch off ignition and remove ignition key.

- Turn light switch to 0 position.

- Unclip plugs - 1 - with a small screwdriver from luggage compartment trim - arrow -.

- Disconnect the electrical connector - 1 -.






- Remove nut - 3 -.

- Push the inner tail lamp - 4 - toward the outside out of the rear lid trim until it can be pull from the outside - arrow -.

• When doing this, make sure the clamp mounting - 2 - does not fall inside the rear lid frame.

Installing

Install in reverse order of removal, noting the following:

• Make sure seal between body and tail lamp housing seals properly.

- Position the inner tail lamp on the outer edge of the rear lid.

- Slide clamping bracket onto interior tail lamp threaded bolts and tighten nut.

• By tightening nut, clamping bracket wedges itself onto interior lights and rear lid.

- Insert plugs in luggage compartment trim.

Tightening Specifications