Diagram 132/17 (Tracks 211-224)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. How to Read Track Diagrams


Instrument cluster control module, Data bus on board diagnostic interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument cluster control module Control Modules in Interior Of Vehicle

J533 - Data bus on board diagnostic interface Control Modules in Interior Of Vehicle

K2 - Generator indicator lamp

K31 - Cruise control indicator lamp

K149 - Engine electronics indicator lamp

SB12 - Fuse 12 (on fuse panel B) Overview Of Fuses

T20d - 20-pin connector

T32 - 32-pin connector

T40 - 40-pin connector

(388) - Ground connection 23 (in main wiring harness)

(389) - Ground connection 24 (in main wiring harness)

(390) - Ground connection 25 (in main wiring harness)

(638) - Ground connection on right A-pillar Overview Of Ground Connections in Interior Of Vehicle

(B482) - Connection 18 (in main wiring harness)

(B708) - Instrument cluster CAN bus high connection 1 (in main wiring harness)

(B709) - Instrument cluster CAN bus low connection 1 (in main wiring harness)

* - Running change

*2 - Omitted as a running change

Previous Diagram 132/16 (Tracks 197-210)

Next Diagram 132/18 (Tracks 225-238)