Pendulum Support

Pendulum Support

Removing

- Remove the noise insulation.






• Depending on the version, different noise insulation may be installed.

- Remove the bolts - 1, 2, 3 - and remove the pendulum support.






Installing

Install in reverse order, paying attention to the following:

• Tightening specifications, refer to => [ Subframe Mount Overview ] Description and Operation.

• Replace bolts that are tightened to the specification.

- Attach the pendulum support to the transmission, bolts - 2 - and - 3 - and then to the subframe - 1 -.

- Install the noise insulation.