Antenna Amplifiers 2 and 3 (R111)/(R112)

Antenna Amplifiers 2 and 3 (R111)/(R112)

The antenna amplifier 2 (R111) / antenna amplifier 3 (R112) are on the left and right D-pillars.

Removing and installing is identical.

- Turn off all electrical consumers.

- Remove the key.

Removing

- Remove the trim from the D-pillar.

- Release and disconnect the connector from the antenna amplifier 2.

- Remove the screws - arrows - and remove the antenna amplifier 2 - 1 - from the D-pillar - 2 -.






Installing

- Install in reverse order of removal.

Tightening specifications, refer to => [ Antenna Overview ] Antenna Overview.