Bumper Cover Assembly Overview

Bumper Cover Assembly Overview






1 Bolt

• 3 Nm

2 Bolt

• 1.5 Nm

3 Bumper cover end plate

• Removing and Installing, refer to => [ Front Bumper Cover End Plate ] Front Bumper Cover End Plate.

4 Cover

• for the towing hook

5 Bumper cover

6 Right front parking aid sensor (G252)

7 Radiator Grille

• Removing and Installing, refer to => [ Radiator Grille ] Radiator Grille.

8 Bolt

• Tightening specifications, item 7 => [ (Item 7) Bolt ] Radiator Grille

9 Lock carrier cover

• Removing and Installing, refer to => [ Lock Carrier Cover ] Lock Carrier Cover.

10 Expanding Rivet

• Remove the clamping pin when removing.

• Only press the clamping pin in when installing.

11 Impact absorber

• Removing and Installing, refer to => [ Impact Absorber ] Impact Absorber.

12 Left front parking aid sensor (G255)

13 Front bumper cover mount

• Removing and Installing, refer to => [ Front Bumper Cover Mount ] Front Bumper Cover Mount.

14 Bolt

• 4 Nm

15 Nut

• 4 Nm

16 Fog Lamp

17 Air intake grille

18 Bolt

• 3 Nm

19 Bolt

• 1.5 Nm

Lock carrier cover - tightening specification and sequence





- Tighten the bolts in the following order to 4 Nm - 2, 3, 5, 1 -.