Rear Wheel Housing Liner

Rear Wheel Housing Liner

Special tools, testers and auxiliary items required

• Locking pliers for the Phaeton steering gear (VAS 6199)

- Use to loosen the clips on the wheel housing liner.






1 Rear Wheel Housing Liner

• Removing

- Rear wheel removed.

- Remove the outer bolts.

- Remove the clips from the retaining pins.

- Remove wheel housing liner downward.

• Installing: in reverse order

2 Screws

• 2 Nm

3 Clip

• Quantity: 9

• After removing the wheel housing liner, the clips must be replaced.

Releasing the clip

- To remove the clips - 3 -, unlock the release lever - 2 - with needle nose pliers in - direction of arrow A - and push it off the pin - 1 - in - direction of arrow B -.






- The locking pliers for the Phaeton steering gear (VAS 6199) may also be alternatively used to release the clips.