Reinforcement Brace

Reinforcement Brace

Removing






- Remove the bumper cover. Refer to => [ Front Bumper Cover, Audi RS4 ] Front Bumper Cover, Audi RS4.

- Remove the electrical connector from the bracket.

- To do this,, press the release in the - direction of arrow A - and remove the electrical connector - 1 - from the bracket - 2 - in the - direction of arrow B -.

- Remove the bolts - 2, 3 - - arrows - and then remove the reinforcement brace - 1 -.






Installing

• Tightening specifications, refer to => [ Radiator Grille Assembly Overview ] Radiator Grille, Audi RS4.

Install in reverse order of removal. Note the following:

- Install the bumper cover => [ Front Bumper Cover, Audi RS4 ] Front Bumper Cover, Audi RS4.