Door Locks: Service and Repair

Interior Door Mechanism Hood Cable

Removing

- Remove housing. Refer to => [ Housing ] Housing.

- Remove the door trim panel.

- Remove the inner door panel cover. Refer to => [ Inner Door Panel Cover ] Inner Door Panel Cover.

- Remove the bolts - arrows -.






- Press the door lock - 1 - to the side and disconnect the electrical connector - 2 - if necessary.

- Disengage the actuating link - 3 - at the door lock cable bracket - 2 - - arrow A -.






- Turn the nipple - 1 - 90° in the - direction of arrow B - and remove it from the door opener release lever - 4 -.

Installing






Install in reverse order of removal. Note the following:

- Insert the nipple - 2 - in the door opener release lever - 3 - - bottom arrow -.

- Rotate the nipple 90° - top arrow - and press the actuating link into the cable bracket on the door lock - 1 - until it engages audibly.