Interior Rearview Mirror

Interior Rearview Mirror

Pay attention to the safety precautions when removing or installing an interior rearview mirror. Refer to => [ Interior Rearview Mirror, Safety Precautions ] Service Precautions and to the General Information => [ Interior Rearview Mirror ] Interior Rearview Mirror.

• Removing and installing the automatic dimming interior rearview mirror (Y7) is described. It is similar to the other versions.

Removing






With Lane Assist:

- Remove the lower cover - 1 - - arrows -.

- Using a screwdriver, unclip and remove the lower cover.

- Remove the mirror base cover - 1 - using a screwdriver.






Without Lane Assist:






- Pry the cover - 1 - out on the bottom of the mirror base - arrows -.

All Vehicles:






- Remove the electrical connector from its retainer.

- Disconnect the electrical harness connector - 2 -.

- Turn the interior rearview mirror counterclockwise - arrow - on the mirror base - 1 - as far as the stop.

- Remove the interior rearview mirror from the retaining plate.

Installing

Install in reverse order of removal. Note the following:

- Position the interior rearview mirror turned 30° from its installation position.

- Then turn the interior rearview mirror clockwise as far as the stop.