Power Sunroof Control Module J245

Power Sunroof Control Module J245

Removing

The neutral position of the cable must be checked after installing or removing the sunroof motor and adjusted if necessary, refer to => [ Neutral Position for Cable, Adjusting ] Neutral Position For Cable, Adjusting.

- Remove the cover for the interior lighting.

- Disconnect electrical connections.

- Remove the 3 screws, item 2=> [ (Item 2) Bolt ] Sunroof Frame and remove the motor through the opening in the headliner.

- Tighten the bolts to 5 Nm when installing, refer to item 2 => [ (Item 2) Bolt ] Sunroof Frame.

- After installing, perform an adaptation.