Fan, Lower Backrest

Fan, Lower Backrest

Removing






- Remove backrest panel:

• Two section backrest cover. Refer to => [ Backrest Cover (Section Two) ] Backrest Cover (Section Two).

• One section backrest cover. Refer to => [ Backrest Cover (Section One) ] Backrest Cover (Section One).

- Adjust the lumbar support to the highest curve while moving the slider - 1 - all the way down - arrow A -.

• Ignore - 2 -.

- Disconnect the connector - 1 -.






- Carefully tilt the backrest fan - 2 - out of the backrest upholstery - arrow -.

Installing






Install in reverse order of removal. Note the following:

• The mounting eyelets on the fan housing - 1 - face up and down.

• Place the wire - 2 - into the gap in the backrest cushions - arrow - facing outward.

- Make sure the backrest lumber support spring plate is seated correctly.