Backrest Trim

Backrest Trim

Removing






- Remove the center armrest - 3 -. Refer to => [ Center Armrest, Split Backrest ] Center Armrest, Split Backrest.

- Push the padding and cover - 1 - to the side the remove the screw - 4 - for the backrest trim - 2 -.

- Hold the backrest trim - 2 - by the lower edge and pull it as far as possible in the direction of the - arrow - off the backrest cover - 1 -.






- Disengage the retaining tabs - 4 - and - 5 -.

• Ignore - 3 -.

- Remove the backrest trim - 1 - in the direction of the - arrow - from the backrest cover - 2 - and unhook the upper hooks - top arrows -.






- Remove the backrest trim.

Installing

The hooks on the upper side of the backrest trim can get damaged during removal.

- Check the backrest trim - 1 - around the hooks - top arrows - for damage; if necessary, replace them.

Further installation is performed in the reverse order of removal.

Tightening specifications, refer to => [ Center Armrest with Cover and Trim Overview ] Center Armrest With Cover and Trim Overview.