Fog/Driving Lamp: Adjustments

Fog Lamp, Adjusting

Checking and Adjusting Conditions

• Tire pressure OK.

• The headlamp lens must be clean and dry.

• The headlamp lens may not be damaged.

• Headlamp-reflector and lamp OK.

• Roll the vehicle several yards or move it back and forth several times to seat the springs.

• Parking brake must not be engaged so vehicle is not under stress.

• Vehicle and headlamp adjusting unit must be on a level surface.

• The headlamp adjusting unit must be aligned to the vehicle. Refer to the Headlamp adjusting unit instructions.

• The inclination dimension is set on the headlamp adjusting unit. Refer to the Headlamp adjusting unit instructions.

• Vehicle load must be created.

Vehicle load on driver's seat in otherwise unloaded vehicle (curb weight).

• One person or 75 kg (165 lbs.).

Procedure

- The vehicles must be standing on a flat surface.

- Turn the headlamp switch to "low beam" - not "Auto".

- Pull the headlamp switch to "fog lamp".

- During the program, you will be asked to perform a headlamp adjustment.

Headlamp Adjustment






- To adjust headlamp range, turn adjusting screw - arrow -.

• Angle dimension: 2%.

• The percentage indicator is based on a 10 meter projection distance. At an angle dimension of 2,0%, for example, converts to 20 cm (7.8 in.).

• Side adjustment is not intended.