Lamp

Lamp

Removing






- Turn off the ignition and remove the ignition key.

- Turn the light switch to the "0" position.

- Release the retaining hooks - A arrows - with a screwdriver.

- Remove the bumper cover air inlet grille - 1 - - arrow B -.

- Remove the screws - 1 and 2 -.






- Remove the fog lamp - 3 - from the bumper cover while guiding the retaining tab - arrow - out of the mount.

- Disconnect the electrical connector.

Installing

• Tightening specification, refer to => [ Fog Lamp Overview, through MY 2012 ] Fog Lamp Overview, Through MY 2012.

Install in reverse order of removal, observing the following:

- Adjust the fog lamps. Refer to => [ Headlamps and Fog Lamps, Checking and Adjusting ] Adjustments.