Automatic Headlamp Vertical Aim Control Overview

Automatic Headlamp Vertical Aim Control Overview






1 Right Headlamp Beam Adjustment Motor (V49)

• Removing and installing:

• through MY 2012 => [ Headlamp Beam Adjustment Motors (V48)/(V49) ] Headlamp Beam Adjustment Motors (V48)/(V49)



2 Control Module

• Vehicles without cornering lamp: Headlamp range control module (J431)

• Vehicles with cornering lamps: Headlamp range/cornering lamp control module (J745)

• Removing and installing, refer to => [ Headlamp Range Control and Cornering Lamp and Headlamp Range Control Modules (J431)/(J745) ] Headlamp Range Control and Cornering Lamp and Headlamp Range Control Modules (J431)/(J745).

• Integrated in the Vehicle electrical system control module (J519) depending on the date of manufacture from MY 2013. Refer to Electronic Parts Catalog (ETKA).

3 Electrical Connector

4 Left Rear Level Control System Sensor (G76)

• Component location: On the left rear control arm.

5 Left Front Level Control System Sensor (G78)

• Component location: On the left front control arm.

• Installed depending on the date of manufacture.

6 Left Headlamp Beam Adjustment Motor (V48)

• Removing and installing:

• through MY 2012 => [ Headlamp Beam Adjustment Motors (V48)/(V49) ] Headlamp Beam Adjustment Motors (V48)/(V49)