HID Headlamp With Cornering Lamp Overview, Through 2012
HID Headlamp with Cornering Lamp Overview, through 2012
Observe the notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.
• Headlamps must be adjusted after performing measures that could influence headlamp adjustment. Refer to => [ Headlamps and Fog Lamps, Checking and Adjusting ] Adjustments.
Part 1
1 Headlamp Washer System Spray Nozzle
2 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
3 Bracket
• Overview, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
4 Adapter Vent Tube
• For the headlamp.
• There are different versions. Refer to the Parts Catalog.
5 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
6 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
7 Ventilation Hose
• Overview, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
8 Power Output Stage
• Only for vehicles with cornering lamps.
• Left headlamp power output stage (J667).
• Right headlamp power output stage (J668).
• Removing and installing, refer to => [ Headlamp Power Output Stages (J667)/(J668) ] Headlamp Power Output Stages (J667)/(J668).
9 Bracket
10 Screw
• 1.8 Nm
11 Seal
12 HID Headlamp Control Module
• Left HID Headlamp control module (J343).
• Right HID Headlamp control module (J344).
• Removing and installing, refer to => [ High-Intensity Gas Discharge Lamp Control Modules (J343)/ ] High-Intensity Gas Discharge Lamp Control Modules (J343)/(J344).
13 Screw
• 1.4 Nm
14 Screw
• 1.4 Nm
15 Daytime Running Lamp and Parking Lamp LED Module
• Left daytime running lamp and parking lamp LED module (L176)
• Right daytime running lamp and parking lamp LED module (L177)
• Removing and installing, refer to => [ LED Parking Lamp/Daytime Running Lamp Modules (L176)/(L177) ] LED Parking Lamp/Daytime Running Lamp Modules (L176)/(L177).
16 Front Turn Signal Lamp Bulb
• Left front turn signal lamp bulb (M5)
• Right front turn signal lamp bulb (M7)
• 12 V, 21 W (H21W)
• Replacing, refer to => [ Front Turn Signal Lamp Bulbs (M5)/(M7) ] Front Turn Signal Lamp Bulbs (M5)/(M7).
17 Screw
• 4.5 Nm
18 Screw
19 Bracket
20 Screw
• 4.5 Nm
21 Speed Nut
22 Gas Discharge Bulb
• With integrated ignition coil.
• Left HID headlamp bulb (L13).
• Right HID headlamp bulb (L14).
• 42 V, 35 W (D3S)
• Replacing, refer to => [ HID Headlamp Bulbs (L13)/(L14) ] HID Headlamp Bulbs (L13)/(L14).
23 Cap
• For the gas discharge bulb.
24 Headlamp
• The daytime running lamps and parking lamps are Light Emitting Diode (LED) lamps and are integrated in the headlamp. The LEDs cannot be replaced. The entire headlamp must be replaced.
• The front side marker lamp bulb is an LED and is integrated in the headlamp. The LED cannot be replaced. The entire headlamp must be replaced.
• Removing and installing, refer to => [ Headlamp ] Headlamp.
25 Screw
• 1.4 Nm
26 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
27 Speed Nut
28 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
29 Speed Nut
30 Mount
• Overview, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
31 Screw
• Tightening specification, refer to => [ Headlamp Housing Mount Overview, through MY 2012 ] Headlamp Housing Mount Overview, Through MY 2012.
32 Screw
33 Front Airbag Crash Sensor
Part 2 - Repair Kits
1 Headlamp
• Removing and installing, refer to => [ Headlamp ] Headlamp.
2 Headlamp Range Control Positioning Motor
• Left headlamp beam adjustment motor (V48).
• Right headlamp beam adjustment motor (V49).
• Removing and installing, refer to => [ Headlamp Beam Adjustment Motors (V48)/(V49) ] Headlamp Beam Adjustment Motors (V48)/(V49).
3 Seal
• Not available separately as a replacement part.
4 Headlamp Range Control Positioning Motor Housing Cap
• Original equipment has a unit with the headlamp. Replace separately; for repair kit, refer to the parts catalog.
• Removing and installing, refer to => [ Headlamp Beam Adjustment Motors (V48)/(V49) ] Headlamp Beam Adjustment Motors (V48)/(V49).
5 Screw
• 2 Nm
• In the repair kit for the headlamp range control positioning motor cap.
6 Screw
• 1.4 Nm