Front Turn Signal Lamp Bulbs (M5)/(M7)

Front Turn Signal Lamp Bulbs (M5)/(M7)

Removing






- Remove the headlamp control module. Refer to => [ High-Intensity Gas Discharge Lamp Control Modules (J343)/ ] High-Intensity Gas Discharge Lamp Control Modules (J343)/(J344).

- Remove the parking lamp and daytime running lamp module. Refer to => [ LED Parking Lamp/Daytime Running Lamp Modules (L176)/(L177) ] LED Parking Lamp/Daytime Running Lamp Modules (L176)/(L177).

- Insert needle nose pliers through the opening for the headlamp control module. Rotate the socket - 1 - counterclockwise - arrow - and remove it from the mount.

- Remove the socket through the opening for the parking lamp/DRL module.

- Disconnect the electrical connector and remove the bulb.

Installing

Install in reverse order of removal, observing the following:

- Insert the new bulb in the socket, taking care not to touch the glass bulb with bare hands.

- Install the parking lamp and daytime running lamp module. Refer to => [ High-Intensity Gas Discharge Lamp Control Modules (J343)/ ] High-Intensity Gas Discharge Lamp Control Modules (J343)/(J344).

- Install the headlamp control module. Refer to => [ High-Intensity Gas Discharge Lamp Control Modules (J343)/ ] High-Intensity Gas Discharge Lamp Control Modules (J343)/(J344).