Power Trunk / Liftgate Lock Switch: Service and Repair

Rear Lid Remote Unlock Switch

Removing






- Turn off the ignition and remove the ignition key.

- Remove the front door trim.

- Disconnect the electrical connector - 3 - from the rear lid remote unlock switch.

- Release the retaining clip - 1 - and press the trim - 2 - with the rear lid remote unlock switch out of the door trim - arrow -.

- Carefully release the retaining hooks - arrows - using a small screwdriver.






- Remove the rear lid remote unlock switch - 1 - back out of the trim - 2 -.

Installing

Install in reverse order of removal, observing the following:

- Press the trim - 2 - with the rear lid remote unlock switch into the mount until the retaining hooks engage.

- Install front door trim.