Body Emblem

Name Badge and Brand Emblem Dimensions

• The vehicle must reach room temperature before installing the name plates and emblems.

• All adhesion surfaces must be free of dust and grease.

• Clean the adhesive surfaces with cleaning solution (D 009 401 04).

• Warm the adhesive areas to approximately 40 °C using a hot air gun.

Name plate and emblem, rear lid, Sedan






• Dimension - a - = 24 mm

• Dimension - b - = 67 mm

• Dimension - c - = 461 mm

• Dimension - d - = 4 mm

Name plate and emblem, rear lid, Avant






• Dimension - a - = 20 mm

• Dimension - b - = 89 mm

• Dimension - c - = 458 mm

• Dimension - d - = 4 mm

• Dimension - e - = 21 mm

Name plate for the fender






1 V6T name plate

• Dimension - a - = 60 mm

• Dimension - b - = 45 mm

• Dimension - b - measured outward from the rear edge of the fender.

2 Cover edge in the fender

3 S-line emblem

• Dimension - c - = 66 mm

• Dimension - d - = 58 mm

• Dimension - d - measured outward from the rear edge of the fender.