Left Flange Shaft Ball Bearing Mounting Bracket

Left Flange Shaft Ball Bearing Mounting Bracket

Special tools, testers and auxiliary items required

• Thrust Plate (VW 401)

• Thrust Plate (VW 402)

• Thrust Disc (VW 412)

• Tube 42 mm Dia. (VW 516)

- Remove the left flange shaft. Refer to => [ Left Flange Shaft ] Left Flange Shaft.






- Remove the locking ring - 1 - from the flange shaft.

- Remove the ball bearing - A - from the flange shaft






- Install the new bearing bracket - 1 -.






• Installed position: the printed side faces the drive axle flange

- Install the new ball bearing - 2 -.

- Install the ball bearing - A - all the way on with the bearing bracket - B - installed.






- Install the circlip - 1 - in the flange shaft groove.