Washer Fluid Level Sensor (G33)

Washer Fluid Level Sensor (G33)

Special tools, testers and auxiliary items required

• Drip Tray

Removing






- Turn off the ignition and remove the ignition key.

- Remove the left front wheel.

- Remove the left front wheel housing liner.

- Disconnect the electrical connector - 1 -.

- Place a drip tray under the windshield washer fluid reservoir.

- Remove the windshield washer fluid level sensor - item 3 - from the washer fluid reservoir - 4 -.

Installing

Install in reverse order of removal, observing the following:

- Check the sealing grommet - 2 - for damage.

- Install the left front wheel house liner.