Diagram 2/7 (Tracks 71-84)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Rear lid lock/alarm/central locking switch, Rear lid lock cylinder unlock button, Comfort system central control module, Rear lid central locking system motor, Left license plate lamp, Right license plate lamp





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F124 - Rear lid lock/alarm/central locking switch

F248 - Rear lid lock cylinder unlock button Locations

J393 - Comfort system central control module Control Modules in rear part of vehicle, overview

T2g - Double connector

T4ay - 4-pin connector, near the rear lid

T17o - 17-pin connector Locations

T32c - 32-pin connector Locations

T32d - 32-pin connector Locations

V53 - Rear lid central locking system motor Locations

X4 - Left license plate lamp

X5 - Right license plate lamp

(249) - Ground connection 2 (in interior wiring harness)

(379) - Ground connection 14 (in main wiring harness)

(B401) - Comfort system CAN bus high connection 5 (in main wiring harness)

(B410) - Comfort system CAN bus low connection 5 (in main wiring harness)

Previous Diagram 2/6 (Tracks 57-70)

Next Diagram 2/8 (Tracks 85-98)