Trim Molding, Audi S5

Trim Molding, Audi S5

Removing






Proceed as follows:

- Remove the front bumper cover end plate. Refer to => [ Front Bumper Cover End Plate ] Front Bumper Cover End Plate.

- Remove the bolts - arrows -.

- Remove the trim molding - 1 - forward from the bumper cover - 2 -.

Installation

• Tightening specifications, refer to => [ Audi S5 Bumper Cover ] Bumper Cover Overview.

Installation is reverse of removal, but note the following:

- Install the front bumper cover end plate. Refer to => [ Front Bumper Cover End Plate ] Front Bumper Cover End Plate.